W5500-EVB

W5500-EVB DEVELOPMENT W5500 CORTEX-M0

Precio (IVA inc.)

1: $84.444

5: $67.555,20

10: $59.110,80

CANTIDAD
Agregar

Disponibilidad en tiempo real

EN STOCK

EXISTENCIA: 5

Se puede enviar inmediatamente


POR CANTIDAD MAYORISTA:

Consultar ventas@semak.com.ar

Descripción

W5500-EVB DEVELOPMENT W5500 CORTEX-M0

Marca: Wiznet

  • W5500 chip development platform for net enabled microcotroller applications
    • Ethernet (W5500 Hardwired TCP/IP chip) and 32-bit ARM® Cortex™-M0 based designs
    • Arduino Pin-compatible platform hardware.


Overview?

W5500 EVB is an evaluation board for W5500 chip based on the 32-bit ARM® Cortex™-M0 microcontroller. It is the easy way to develop internet connection for efficient and small embedded systems using W5500, WIZnet's hardwired TCP/IP embedded Ethernet controller. It has been designed to be hardware pin-compatible with 'Arduino shields' for the 'Arduino UNO Rev3' and other footprint-compatible boards.

It is based on the NXP LPC11E36 MCU with a 32-bit ARM® Cortex™-M0 core running at 50MHz. It includes 96kB Flash memory, 12kB SRAM, 4kB EEPROM and various interfaces, including SPI/SSP, I2C, UART, ADC, PWM and other I/O interfaces. Additionally, the on-board temperature sensor / potentiometer is ready for useful ADC control examples. Two programmable push button switches, one RGB LED, an external 4-Mbit serial dataflash memory and a 10/100 Base-Tx RJ-45 connector with an integrated transformer are on board to implement embedded networking applications.

The W5500 EVB provides benefits in developing easier and powerful network applications on small form-factor and non-OS based embedded devices using the W5500 chip.

W5500 EVB Rev1.0


Features?

WIZnet W5500 Hardwired TCP/IP chip

  • Hardwired TCP/IP embedded Ethernet controller
  • SPI (Serial Peripheral Interface) Microcontroller Interface
  • 32kB internal Tx/Rx socket buffer memory
  • Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols
  • Easy to implement of the other network protocols
  • W5500 Product page

NXP LPC11E36/501 MCU (LPC11E36FHN33)

  • 32-bit ARM® Cortex™-M0 microcontroller running at up to 50MHz
  • 96kB on-chip flash program memory
  • 12kB on-chip SRAM data memory
  • 4kB on-chip EEPROM data memory
  • 1 x UART
  • 1 x I2C
  • 2 x SPI/SSP
  • 8 x 10-bit ADC
  • 4 x Timer (16, 32-bit)
  • 11 x PWM
  • ?? NXP LPC11E36FHN33 Product page

On-board Temperature sensor

  • Microchip TC1047A (Temperature-to-Voltage Converter)
  • Supply Voltage Range: 2.7V to 4.4V
  • Wide Temperature Measurement Range: -40 to +125 celsius degrees
  • High Temperature Converter Accuracy: 2 celsius degrees, Max, at 25 celsius degrees
  • ?? Microchip TC1047A Product page

Connectors

  • Pin-compatible with Arduino Shields designed for the UNO Rev3
    • Digital pins D0 to D15, Analog inputs A0 to A5, the power header and Etc.
  • 10/100Mbps Ethernet (RJ-45 with transformer)
  • Virtual COM Port(UART via USB Mini-B) - ??FTDI Drivers Download Page
  • ARM standard debug connector: 10-pin Cortex debug connector for SWD (Serial Wire Debug)

Others

  • 2 x User's Push button switches
  • 1 x RGB LED
  • 1 x Potentiometer (ADC)
  • External 4-Mbit serial dataflash (SPI, 2048 pages x 256/264 byte/page)
  • Industrial temperature specified (-40 to +85 degrees Celsius)
  • [Reset] and [ISP mode][1] Push button switch

Form-factor

  • Dimension : 93 X 53 X 17.3(H) (Unit : mm)
  • 5V DC power supply and +5V/500mA from power supply USB connector
  • GPIO Input Voltage : 0 ~ 5V
  • GPIO Output Voltage : 0 ~ 3.3V
  • Two layer PCB (FR-4 material, 1.6T)
  • Arduino Compatible Header Pinout

W5500 EVB Rev1.0 Arduino Compatible Header Pin Map

  • External Pinout

W5500 EVB Rev1.0 External Pin Map


Firmware?

W5500 EVB firmware project based on LPCXpresso IDE. For more details about LPCXpresso IDE, please refer to ??NXP LPCXpresso platform page.

LPCXpresso IDE Install & Activation Guide How to Install and Activate LPCXpresso IDE

Download the Libraries and Application example source code for W5500-EVB ??https://github.com/Wiznet/W5500_EVB



Documentación

top